nasflying.blogg.se - Verizon 4g lte router manual

Verizon 4g lte router manual pdf#
Verizon 4g lte router manual install#
Verizon 4g lte router manual update#

Verizon 4g lte router manual update#

The device will reset and update its software.

Press and hold the reset button for 30 seconds.

Unplug the 4G LTE CellSpot, wait 5 seconds and plug it back in.

Plug in the CellSpot router and wait for it to power up completely.

If you have a separate router, plug that in and wait for it to power up completely.

Plug in your modem and wait for it to power up completely.

Ensure ports UDP 500, UDP 4500 and UDP 123 are opened and place the device in a DMZ.

Check with Internet Service Provider on network settings.

Check your internet works on other devices.

Wait at least 2 hours after the device was originally plugged in and set up.įlashing green light above 4G LTE CellSpot WAN port means good Internet connection and traffic in progress.ĭevice is unable to reach T-Mobile network.

Check the Wi-Fi router or Wi-Fi cable modem router are correctly connected.

Check your Internet connectivity and check with your Internet Service Provider if ports UDP 500, UDP 4500 and UDP 123 are open.ĭevice connection issue with the Wi-Fi router or Wi-Fi cable modem router.

Verizon 4g lte router manual install#

Once upstream devices are stable, install 4G LTE CellSpot again.Restart the other Internet devices such as modem, Wi-Fi router or Wi-Fi cable modem router.You may receive SMS or email notification from T-Mobile to verify your device use address for emergency 911 call safety.įollow the steps in Register the address of use.ĭevice self installation exceeds 2 hours. Without GPS signal lock, device is still able to proceed through setup and operate normally. T-Mobile can't provide detailed help with non-T-Mobile service or equipment. Your ISP or equipment manufacturer can help with these settings. If your ISP confirms the ports are open, ask them to add the CellSpot to a DMZ.UDP 500/4500: VPN or IPSec tunnels, business application.If these are blocked, you must ask your ISP to open these ports. In the "Customer device use address box," click Edit.įor the 4G LTE CellSpot to work, UDP ports 123, 500, and 4500 must be open.Ĭontact your Internet provider (ISP) to ask if these ports are blocked.Click Coverage devices in the bottom left.If you need to register or update the address of use, follow these steps: The 4G LTE CellSpot has to check its location when it sets up.

Verizon 4g lte router manual pdf#

Start guide not opening? Install the free Adobe PDF viewer on your computer, Android, or Apple iOS device. Click to download the 4G LTE CellSpot English start guide or Spanish start guide.